Windows does not recognize second Hard Drive

Download PC Repair Tool to rapidly find & fix Windows errors automatically

Before one Hard Drive would be good enough to shop your information, files, songs, videos, etc. – just at present with the increase in downloading action and the tendency to save photographs and home videos on your Windows xi or Windows ten computer, Hard Disk infinite can fall brusque. That is why many then choose to adhere a second Hard Drive to their PC. Merely a common trouble some confront is that your Windows does non recognize the second drive that you have installed. If your Hard Drive is non showing up or are facing such an effect, perhaps something here in this post may help you.

Windows does not recognize 2nd Difficult Drive

ane] Check if the Difficult Drive is damaged

This is probably the first task you should perform. Otherwise, you volition end up wasting your precious time on this matter. If your hard drive is quite onetime and it has attracted a thick layer of dust or is damaged information technology might not work as usual. Therefore, before installing it on your reckoner, check it.

ii] Accept a look at connection setup

To utilize a hard drive with your computer, yous need to connect two different power cords. One SATA cable will be betwixt the motherboard and hard bulldoze. The second SATA cable will exist between the hard disk and SMPS or any other source, where it can get the Power from. If yous make any error, your computer won't be able to detect the hard bulldoze. Also, you should plug in the SATA cable on the right port on the motherboard.

three] Apply Hardware and Devices Troubleshooter

Troubleshooting is an inbuilt Windows feature that is listed in the Control Panel. You tin run the Hardware and Devices Troubleshooter and see if it can gear up the problem.

iv] Scan for hardware changes

Open Device Director. To do and so, open the Win+X menu and click on information technology. Adjacent, correct-click on Disk drives and select Scan for hardware changes.

It should aid.

five] Check Device Status

Run devmgmt.msc to open the Device Managing director. Expand Deejay Drive. Right-click on all the ones listed there, select Properties and check the Device Status. Information technology should say – The device is working properly. If it is not, and so Update commuter software to update the device drivers. Or you could select Uninstall and then afterward a restart, connect the Hard Drive and select Scan for hardware changes hither.

Set up: Hard Drive Not installed trouble.

6] Install proper device commuter

If you are using unlike hd manufacturers, you lot might want to check if you take installed the correct device driver. If you might want to as well update your existing Device Driver to its latest available version.

Read: SSD non showing up in Disk Management or BIOS in Windows.

7] Initialize Deejay

If in your Deejay Management console you encounter an Unknown Disk or a Not Initialized Disk shown, then right-click on it and select Initialize Disk. Follow the on-screen instructions to their completion. Did this help?

Promise the suggestions here help you.

See this mail if your USB 3.0 External Hard Bulldoze is non recognized.

Anand Khanse is the Admin of TheWindowsClub.com, a x-year Microsoft MVP (2006-16) & a Windows Insider MVP. Delight read the entire post & the comments get-go, create a Organisation Restore Point before making any changes to your system & be careful near any 3rd-party offers while installing freeware.